There was a problem loading the comments.

Complete die set contents

Support Portal  »  Knowledgebase  »  Viewing Article

  Print

Rifle

The Pacesetter Rifle Die Set, which includes a full length steel sizing die (requires case lubrication), bullet seating die, factory crimp die, shell holder, powder dipper and load data. This set is recommended for assembling ammunition for hunting purposes as the finished rounds chamber easily and can withstand rough handling of the firearm action.  

The Limited Production 2-Die Sets consist of two dies: the full length steel sizing die (requires case lubrication) and the bullet seating die as well as the shell holder, powder dipper and load data. 

The Collet 2-Die Set includes the Collet neck sizing die (requires no case lubrication), dead length bullet seating die, shell holder, powder dipper and load data. This set is designed for assembling the most accurate ammunition but is not recommended for hunting rounds as the case is neck sized only and the bullet is not crimped in case.

The Ultimate Rifle 4-Die Set includes both a full length steel sizing die (requires case lubrication), collet neck sizing die (requires no case lubrication), easy adjust dead length bullet seating die, factory crimp die, shell holder, powder dipper and load data. This is essentially a Collet Die Set with the addition of the steel full length sizing die so that one can prepare newly acquired cases for the first firing in the rifle.

The RGB (Really Great Buy) Rifle Die Set comes as a standard two die rifle set that contains a full length sizing die (requires case lubrication and a bullet seater die. This set is designed to meet a tight budget and contains only the two dies. 

Handgun/Pistol

Carbide Pistol 3-Die Sets contain the carbide sizer (require no lubrication), the powder through expanding die, the seater / crimping die, a shell holder, powder dipper and load data. The bullet seating/crimping die applies a modified taper crimp negating the need for a separate taper crimp die. 

The Lee Deluxe Pistol 4-Die Set includes our popular Carbide Pistol 3-Die set (explained above) plus the addition of our Lee Carbide Factory Crimp Die. This additional die has a carbide ring that post sizes your case ensuring that your loaded case will fit into the chamber of your gun. Additionally, the degree of crimp is determined by the finger adjustable crimp knob on top of the die. This die is meant to work in conjunction with your bullet seating die as it has no provision for seating the bullet itself. This set includes the shellholder, powder dipper and load data as well. The Deluxe Pistol Die Set comes packaged in our four die flat box.


Share via

Related Articles


Self-Hosted Help Desk Software by SupportPal

Categories

Tags

© Lee Precision, Inc.