The bullet seater plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seater plug deforms the nose of the bullet you are trying to seat, we can make a custom bullet seater plug to fit your bullet. For this we would need a sample bullet, a fired and sized piece of brass payment of $8 plus any applicable sales tax and shipping/handling. Please note, 50 BMG bullet seating plug is $30.00. Current lead time is 4 to 6 weeks.
A custom bullet seating plug can be ordered online.
Send a sample bullet and fired and sized piece of brass to our address:
Lee Precision, Inc.
4275 Highway "U"
Hartford, WI 53027
Many times, you can fix this yourself through the use of a drill press. Secure the seater plug under a 3/32" bit and drill further into it. The distance should never be increased by more than 1/4".
Another option to consider is our new micrometer bullet seating die. Lee Precision, Inc. - Rifle Precision Micrometer Bullet Seating Die
The bullet seating stem is machined and burnished to seat nearly any point style bullet without damage or marking. The case mouth and bullet are held in perfect alignment by a floating bullet guide for optimal seating results.
