There was a problem loading the comments.

Mount and Setup Breech Lock Challenger Press

Support Portal  »  Knowledgebase  »  Viewing Article

  Print
  1. Mount the press to a solid bench using 1/4" or 5/16" inch bolts.
  2. Install the lever.
  3. Install the primer deflector plate using a #8 self tapping screw.
  4. Install the spent primer tube to the bottom of the press.
  5. Install the primer arm into the slot in the ram. Even if you prime off the press, you should keep a primer arm in the ram so it directs your spent primer to the waste tube.
  6. Install the shell holder in the top of the ram.
  7. Install the breech lock bushing into the top of the press frame.
You are ready to load. Install the dies as per the instructions provided. 

Share via

Related Articles


Self-Hosted Help Desk Software by SupportPal

Tags

© Lee Precision, Inc.