The Rifle Charging Die fits all calibers from the .22 Hornet to through the .308 Winchester (max overall cartridge length our our rifle charging die can accept is 2.810 inches).
Instructions for use with the Lee Auto-Disk Powder Measure
- Screw the rifle adaptor onto your Auto-Disk Powder Measure making certain the actuator drop tube is inside.
- Adjust the measure with an empty case in the shell holder and the ram fully raised. Screw the unit into the press just enough to fully move the disk to the dump position.
- To increase the volume of your Auto-Disk Powder Measure, purchase the Double Disk Kit (90195). This allows stacking 2 disks to double the capacity and provides thousands of different powder charges in .1 to .2 grain increments.
To view a video on how to install the Double Disk Kit on a Powder Measure, please see the following link:
https://www.youtube.com/watch?v=0ZPJnxDeUUw
