The shot bushings included with the Load All are calibrated for lead shot, and will not reflect the correct weight when reloading steel. One would have to weigh steel shot charges to get the desired weight.
An effective way to achieve this would be to purchase our
Adjustable Shot Dipper. Once you have the proper weight of shot achieved, place it into the dipper adjusted to it's maximum setting. Then, simply reduce the adjustment until the shot level is even with the top of the dipper. Make a note of that setting and from that point forward, you may use that setting to achieve that weight of steel shot every time. Note that the dipper is calibrated for lead shot, therefore the setting for your steel shot weight will not correspond with the weight indicated on the dipper.
For load data for steel or bismuth shot, contact Ballistic Products at
info@ballisticproducts.com, or Precision Reloading Inc. at
www.precisionreloading.com
