The Bullet Feed Kit was complete for one bullet diameter and range of length. Bullet Feed Kits were only available for pistol calibers and are only compatible with the Lee Pro1000 and Loadmaster presses.
The Bullet Feed Tube will hold approximately 25 bullets. The kit included both a small and large tube. The small tube fits inside of the large tube, when loading large bullets, the small tube is removed.
The bullets that work best in the Bullet Feeder are jacketed or lead round nose flat base bullets.
To determine which Bullet Feeding Kit to use, you will need to know the caliber and the length of the bullet (projectile) in inches. If you do not know the length of the bullet, find one and measure it with a caliper.
For 30 and 32 cal pistol bullets, up to .60" long, formerly sold under product number 90892.
For 9mm (.355") to .365" pistol bullets, up to .46" long, formerly sold under product number 90893.
For 9mm (.355") to .365" pistol bullets, .46" to .60" long, formerly sold under product number 90894.
For 9mm (.355") to .365" pistol bullets, .60" to .75" long, formerly sold under product number 90895.
For 40 cal (.401") to 44 cal (.430') pistol bullets, up to .65" long, formerly sold under product number 90896.
For 40 cal (.401") to 44 cal (.430') pistol bullets, .65" to .80" long, formerly sold under product number 90897.
For 45 cal (452"/.454") pistol bullets, up to .67" long, formerly sold under product number 90898.
Another optional accessory for your Bullet Feed Kit is the product number 90280 Multi-Tube Adapter. The Multi-Tube Adapter allows you to add three more tubes to your Bullet Feed set up and should hold around 100 bullets total.
