There was a problem loading the comments.

Auto Prime broken lever

Support Portal  »  Knowledgebase  »  Viewing Article

  Print
The Auto Prime gives its user a good "feel" for primer insertion. You should be able to feel through the lever when the primer is seated in the case. No further pressure on the lever is required. If you press the lever until it contacts the body, it will eventually break. Apply a high viscosity lube (lithium grease, Vaseline, etc.) to the ends of the connecting link before replacing the lever.

If you are priming military cases, that have had the primers staked in position, make sure you chamfer the primer hole before trying to prime them.

The old Auto Prime with the round primer trays has been discontinued, and replaced by the New Auto Prime. There are no service parts available for the old Auto Prime with the round trays. If you are interested, you can return your Auto Prime to the factory, and receive $9.99 credit (1/2 merchandise credit) towards the purchase the ACP, New Auto Prime, Bench Prime plus shipping. Include a note inside the box with your intentions, along with your name and phone number, and we will take care of the exchange.

Share via

Related Articles


Self-Hosted Help Desk Software by SupportPal

Tags

© Lee Precision, Inc.