There was a problem loading the comments.

Does the Rock-Chucker or Pro-2000 fit on the Lee Reloading Stand or Bench Plate?

Support Portal  »  Knowledgebase  »  Viewing Article

  Print
The original Rock-Chucker, if mounted properly, will fit on the Reloading Stand/Bench Plate system, however you will need to mount the press on a hardwood block cut to the proper size. See the attached PDFs for a fit guide and block template. When mounting your Rock-Chucker, install the hardwood base block into the steel Z-brackets of the stand/Bench Plate and tighten the Z-brackets. Next place you press on top of the hardwood block and mark where the holes need be be drilled.
The RCBS Pro-2000 will not fit on the Bench Plate system, as the base is too wide, but can be mounted directly to the thick steel top on the Reloading Stand. The Bench Plate system and Reloading Stand will fit all Lee Precision Metallic Reloading Presses.

Share via

Related Articles


Self-Hosted Help Desk Software by SupportPal

Tags

© Lee Precision, Inc.